How to fix a warped carbon steel pan? all you need to know – Best

Many metal pans tend to warp over time. The same goes for carbon steel pans.

Warping can cause uneven cooking and cause some food to settle on part of the pan.

Eventually, the bottom of the pan will become too wobbly to use properly. The good news is that you can repair a warped carbon steel pan yourself.

The process is simple and won’t cost you much. So you can save money on repairs. That’s why this comprehensive guide explains how to do it.

A step-by-step process to repair a warped carbon steel pan

It is best to try to repair your warped carbon steel stove as soon as you notice the warping.

Leaving it unattended will make warping worse. As a result, the pan may eventually crack, rendering it unusable.

In this case you need a replacement and that means spending money. It is therefore in your own interest to solve it yourself and quickly.

Step 1. Understand How Your Carbon Steel Stove Warped

Carbon steel pans can warp in two ways. The pan can be folded inwards or outwards.

If your pan is bent inward, food will cook unevenly. On the other hand, if it is bent outwards, it will be wobbly.

You can tell the difference just by looking at it. Once you’ve figured out how the pan is warped, you can adjust how you secure it.

Step 2. Gather the necessary materials

Chances are you already have the equipment you need to repair your warped carbon steel pan.

If you don’t, however, everything is readily available and relatively cheap.

Here is the equipment you need.

A wooden board

The board should be level and smooth, with no bumps or dips in the surface.

Make sure the board is higher than the pan when folded outward. In this way, the whole pan adapts to the surface of the wood.

Get a piece of wood that will fit inside the pan when the carbon steel pan is bent inward.

However, make sure that the wood still covers most of the surface of the pan.

Measure the shelf in advance so you know the dimensions you need for the shelf. If it’s too big, you can always cut the wood.

2 cloth napkins

You will need cloth napkins suitable for hot pans. Also, make sure the napkins are bigger than the pan so everything is covered.

You also don’t want the pan to come out of the towel when you pound it.

A wooden or rubber mallet

A wooden or rubber mallet will prevent damage to the carbon steel platter.

However, you can use a hammer as an alternative. That said, be sure to hit it gently.

A level

The level will make sure your pan is level once you’ve finished fixing it.

Step 3. Choose the suitable one to fix the pan

It is best to carry out this process on a workbench. You can work on the floor or on the counter.

However, hammering can damage the counter or the floor.

Wherever you work, make sure you are near a stove or other heat source.

In addition, the platform should be heat resistant. You put a hot pan on it.

Step 4. Lay the towel down

Lay the cloth towel on the workbench or platform you are working on.

The purpose of this material is to prevent damage to the bottom of the pan.

You can scratch the pan if you place it directly on the workbench.

If you hammer hard without the cloth towel, you may even break the carbon steel top.

Use only a dry cloth towel

Never use a damp or wet towel for this process. The heat from the pan can cause the damp towel to release steam.

As a result, you risk burning yourself. It would also make the job unnecessarily more difficult.

Step 5. Place the pan on a stove

You need to heat the pan to fix the warping on it. Heat makes the metal more malleable and less rigid.

This makes it less likely that you will break your carbon steel pan.

Let the pan heat up for a few minutes

Let the carbon steel pan sit over low heat for about 5-10 minutes.

After that, the pan will be hot enough to fix the warping without getting too hot to work effectively.

Step 6. Place the carbon steel tabletop on the workbench

Remove the carbon steel pan from the heat source. Then place it on the dry cloth towel on the workbench.

You should hold it with the curved side up.

That is, if the carbon steel platter is curved inward or convex, you should position the platter so that the surface is facing up.

It would look like you would normally use a pan for cooking.

On the other hand, you should place the carbon steel pan upside down if it is curved outward or concave.

You have to remember to hammer on the side that sticks out.

Step 7. Place the wooden board on the board

Place the second cloth towel over the part of the pan with the protrusion. You place the wooden board exactly on top of the pan.

This way, the wood does not lie directly on the surface of the pan.

You only need to lay down the second towel if you’re dealing with a convex or inwardly warped pan.

This means you won’t scratch the surface of the pan. This is especially useful for carbon steel pans with a non-stick coating.

Be careful when placing it in the hot pan so that your fingers don’t touch anything but the wood. The sides of the carbon steel pan will be hot.

Step 8. Hammer the wood on the pan

Once the wood is in the correct position, use your mallet or mallet to gently hammer it.

Make sure the handle or any other part of the hammer does not come into contact with the pan.

You may need to tap the wood a little hard if the bulge doesn’t move easily.

Step 9. Inspect warpage on the carbon steel platen

Keep hitting him until he starts to straighten up. Slow down when you feel you are getting closer to total regularity.

Don’t get carried away with the hammering, as you don’t want the pan to puff up in the opposite direction.

So place your spirit level and on the part of the pan with the bulge. Take a good look at its regularity.

If the carbon steel platter is still not completely flat, repeat steps 8 and 9.

Step 10. Clean warped carbon steel pan

Once you are sure the pan is even, you will need to clean the pan.

A non-stick carbon steel pan may leave chips of non-stick material after repair.

Once the pan has cooled, remove the material, wash it, let it dry, and place it in your cupboard.

How to prevent warping of your carbon steel pans

You can avoid having to repair your warped carbon steel pans by reducing the risk of warping pans.

The following tips apply to all types of metal pans.

Do not place hot pans in water

Do not place the pan in a wet sink after cooking.

The moisture from a few drops of water can sizzle and suddenly change the temperature in the pan.

The sudden change in temperature can accelerate warping. You should also keep this tip in mind when cooking.

So don’t immediately put water in a hot pan, unless you really have to.

Do not place cold pans in preheated ovens

Another way to suddenly change the temperature of your metal skillet is to place a cold skillet in your preheated oven.

Instead, let the pan warm in the oven while you preheat it.

If that’s not possible, at least make sure the carbon steel or other metal pan is at room temperature.

Let your pans cool down before washing them

You should do your best to reduce temperature fluctuations. So wait for your metal pans to cool completely before trying to wash them.

At the same time, don’t let the pan sit too long after cooking, as this can make it more difficult to remove grease and baked-on food residue.

Last words

Treat your carbon steel pans with care and warping will become less of an issue. You should also be very careful with rimless or very low carbon steel pans.

These pans do not have extra support on the sides to keep them upright like with deeper pans. These pans can therefore easily become deformed.

Other articles you might also like:

  • How to Repair Holes in Stainless Steel Pans (2 Methods)
  • Carbon Steel Saucepan vs Stainless Steel Saucepan – Which is Better?
  • How to Repair Holes in Stainless Steel Pans (2 Methods)
  • When and how to recycle your frying pans?